Ace FMC-HYD-204 Hydraulic Pump

FMC-HYD-204
•Suction 1-1/4" Discharge 1" 100 PSI Max - 85 GPM Max
•204 motor requires 4 GPM hydraulic flow on PC Closed and Open Center Systems
•Integral Needle Valve bypasses up to 9 GPM on Open Center Systems
•Standard with Viton Carbon/Ceramic Mechanical Seal
•Chemical Resistant Valox Impeller
•Cast Iron Pump
•Stainless Steel Shaft and Wear Ring

Do Not Run Dry - Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period.

Do Not Run With Flow Shutoff For Extended Periods - Running the pump with no flow for extended periods of time will result in excessive heat and pump failure. A continuous bypass is recommended for low flow applications